PROPOSAL FOR AN AMENDMENT TO REGULATION NO. 79 (STEERING EQUIPMENT)
above;
(b) Until uniform standards have been agreed the environmental
protection of the connector shall be appropriate to the application
and included in the Annex 6 assessment; and
(c) The connector shall not be interchangeable with an existing
ECE/TRANS/WP.29/GRRF/2016/20
5
electrical connector currently used on the towing vehicle i.e. (...) Until a uniform standard has been defined the connector used to
connect to the trailer shall fulfil the following:
(a) The pins shall have a current carrying capacity compatible with
the maximum current defined by the vehicle manufacturer in
paragraph 3.1. above;
(b) Until uniform standards have been agreed the environmental
protection of the connector shall be appropriate to the application
and included in the Annex 6 assessment;
(c) The connector shall not be interchangeable with an existing
electrical connector currently used on the towing vehicle, i.e.
(...) This is considered appropriate for such a trailer operating behind a towing
vehicle that is not equipped with the requisite power supply for the trailer steering system
until uniform provisions have been defined for a connector and that connector is in general
use.
5.
Language:English
Score: 1190197.9
-
daccess-ods.un.org/acce...RANS/WP.29/GRRF/2016/20&Lang=E
Data Source: ods
PROPOSAL FOR AN AMENDMENT TO REGULATION NO. 79 (STEERING EQUIPMENT)
Until a uniform standard has been defined the connector used to connect
to the trailer shall fulfil the following:
(a) The pins shall have a current carrying capacity compatible with the
maximum continuous current defined in paragraph 2.3. above;
(b) Until uniform standards have been agreed the environmental
protection of the connector shall be appropriate to the application
and included in the Annex 6 assessment; and
(c) The connector shall not be interchangeable with an existing
electrical connector currently used on the towing vehicle
i.e. (...) Until a uniform standard has been defined the connector used to connect
to the trailer shall fulfil the following:
(a) The pins shall have a current carrying capacity compatible with the
maximum current defined by the vehicle manufacturer in
paragraph 3.1. above;
(b) Until uniform standards have been agreed the environmental
protection of the connector shall be appropriate to the application
and included in the Annex 6 assessment;
(c) The connector shall not be interchangeable with an existing
electrical connector currently used on the towing vehicle, i.e. (...) This
is considered appropriate for such a trailer operating behind a towing vehicle that is not
equipped with the requisite power supply for the trailer steering system until uniform
provisions have been defined for a connector and that connector is in general use.
Language:English
Score: 1190197.9
-
daccess-ods.un.org/acce...TRANS/WP.29/GRRF/2015/8&Lang=E
Data Source: ods
FM tuning range: 18.5-108 MHz, 522-1611 Khz Presets:
40,230 VAC/50 Hz,1U Rack 230 VAC/50 Hz
1
39 U470000 Audio-Visual
Equipment
LED 7.S Digital Clock, single face displays HH:MM
70rnm SS 50MM,
standalone Clock.
2
40 U470000 Audio-Visual
Equipment
Prewiring Production Studio including cables, connectors,
interconnection cable, connectors and factory test
1
41 U470000 Audio-Visual
Equipment
Uninterrupted power supply (UPS 1
42 U470000 Audio-Visual
Equipment
Audio distribution amplifier 1
5
43 U470000 Audio-Visual
Equipment 4K Camera System Hardware, and Accessories With portable Lighting Kit
2
MASTER CONTROL ROOM
44 U470000 Audio-Visual
Equipment
Server rack cabinet 19 “27 Unit 1000x600 Black, Tempered glass
front door with three pivot points to easily reversed thanks to quick
release handle with key
)
2
45 U470000 Audio-Visual
Equipment
Master switch KVM 8 P, USB/PS2 LCD 17” for Rack 19”.
2
46 U470000 Audio-Visual
Equipment
Audio server: 1U 4 Bay Storage Server System with Software
16TB
2
47 U470000 Audio-Visual
Equipment
4 Stereo Channel Audio Logger,
Streaming utilities, 4 channels. (...) Normal and
through mode operation, 3-way front panel mode switches I/ 4 “
TRS connectors, 19 ‘ rack mount chassis.
2
56 U470000 Audio-Visual
Equipment
MASTER CLOCK AND TIME DISTR.
GPS clock receiver for CTX synchronization. 10 MHz and Ipps
outputs.
2
57 U470000 Audio-
Visual
Equipment
LED Digital Clock, Single face displays HH:MM: SS,
HH:MM 70mm SS 50mm, standalone Clock.
2
58 U470000 Audio-Visual
Equipment
Audio Waveform Monitor,
2
59 U470000 Audio-Visual
Equipment
MCR Prewiring, including cable connector and system test 1
6
INSTALLATION & TRAINING
60 U470000 Audio-Visual
Equipment
Laptop – HP core i7.
Language:English
Score: 1189203.1
-
https://www.unicef.org/zimbabwe/media/5256/file
Data Source: un
PROPOSAL FOR AMENDMENTS TO REGULATION NO. 79
The maximum current supply available at the connector referenced in
paragraph 2.5.2. below shall be defined by the towing vehicle
manufacturer.
2.4. (...) (b) Until uniform standards have been agreed the environmental
protection of the connector shall be appropriate to the application
and included in the Annex 6 assessment; and
(c) The connector shall not be interchangeable with an existing
electrical connector currently used on the towing vehicle
i.e. (...) Until a uniform standard has been defined the connector used to connect
to the trailer shall fulfil the following:
(a) The pins shall have a current carrying capacity compatible with
the maximum current defined by the vehicle manufacturer in
paragraph 3.1. above;
(b) Until uniform standards have been agreed the environmental
protection of the connector shall be appropriate to the application
and included in the Annex 6 assessment;
(c) The connector shall not be interchangeable with an existing
electrical connector currently used on the towing vehicle, i.e.
Language:English
Score: 1187366.8
-
daccess-ods.un.org/acce...TRANS/WP.29/GRRF/2014/8&Lang=E
Data Source: ods
The channels specified include balanced channels that support transmission of up to 1 GHz (TV via “twisted pair”) and use a new mating interface at the outlet for Broadcast Communications Technologies. A connector implementing this interface that also supports connector sharing is shown.
Language:English
Score: 1186801.3
-
https://www.itu.int/ITU-T/work.../abstract/hnhs_s5p4_wp_abs.doc
Data Source: un
United Nations EC
However, the
requirement that the distance between the connector on the truck and the
connector on the semitrailer shall be ≥ 350 mm, causes problems.
(...) Figure 4 specifies that the distance between the connector on the truck and the
connector on the semitrailer shall be ≥ 350 mm. (...) The footnote
reads as follows:
“3 The requirement in ISO 4009 (paragraph 3.1, figure 4), referred to in ISO
12098:2004, that the locations for electrical and pneumatic connections shall
be ≥ 350 mm between the connector on the truck and the connector on the
semitrailer for articulated vehicles, may be dispensed with.”.
Language:English
Score: 1186404.9
-
daccess-ods.un.org/acce...=ECE/TRANS/WP.15/2011/9&Lang=E
Data Source: ods
REVISED PROPOSAL FOR DRAFT AMENDMENTS TO REGULATION NO. 110, SPECIFIC COMPONENTS FOR CNG / SUBMITTED BY THE EXPERT FROM THE EUROPEAN NATURAL GAS VEHICLE ASSOCIATION (ENGVA)
Key
_____________
1/ Road Vehicles compressed Natural Gas (CNG) refuelling connector – part 1: 20 MPa
(200 bar) connector.
2/ As defined in Annex 7 to the Consolidated Resolution on the Construction of Vehicles
(R.E.3) (TRANS/WP.29/78/Rev.1/Amend.2)."
(...) Recently,
approved ISO 14469-1 standard for 200 bar (20 MPa) connector for light-duty vehicles provides an
opportunity to adopt a unique, worldwide recognized and approved fuelling connector.
(...) ISO is now also preparing a similar standard for heavy-duty CNG vehicles: ISO DIS 14469-2 "Road
vehicles Compressed Natural Gas (CNG) refuelling connector" – part 2: 20 MPa (200 bar) connector
size 2
Language:English
Score: 1186404.9
-
daccess-ods.un.org/acce...TRANS/WP.29/GRPE/2007/6&Lang=E
Data Source: ods
PROPOSAL FOR DRAFT SUPPLEMENT 2 TO THE 01 SERIES OF AMENDMENTS TO REGULATION NO. 67, EQUIPMENT FOR LIQUEFIED PETROLEUM GAS / TRANSMITTED BY THE WORKING PARTY ON POLLUTION AND ENERGY (GRPE)
The couplings can be made as swivel-nut type or as quick-
connector type.
1.6.2.4. It shall be impossible to disconnect the quick-connector type
without specific measures or the use of dedicated tools."
(...) The couplings can be made as swivel-nut type or as quick-
connector type.
2.6.5. It shall be impossible to disconnect the quick-connector type
without specific measures or the use of dedicated tools."
(...) Compatibility with heat exchange fluids of non metallic parts
17.1. Test samples shall be submerged in heat exchange medium for
168 hours at 90 °C; then they shall be dried for 48 hours at a
temperature of 40 °C.
Language:English
Score: 1184679.6
-
daccess-ods.un.org/acce...&DS=TRANS/WP.29/2002/72&Lang=E
Data Source: ods
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS ... REGULATION NO. 67, UNIFORM PROVISIONS CONCERNING APPROVAL OF SPECIFIC EQUIPMENT OF MOTOR VEHICLES USING LIQUEFIED PETROLEUM GASES IN THEIR PROPULSION SYSTEM ; APPROVAL OF A VEHICLE FITTED WITH SPECIFIC EQUIPMENT FOR THE USE OF LIQUEFIED PETROLEUM GASES IN ITS PROPULSION SYSTEM WITH REGARD TO THE INSTALLATION OF SUCH EQUIPMENT
The couplings can be made as swivel-nut type or as quick-connector type.
1.6.2.4. It shall be impossible to disconnect the quick-connector type without specific
measures or the use of dedicated tools."
(...) The couplings can be made as swivel-nut type or as quick-connector type.
2.6.5. It shall be impossible to disconnect the quick-connector type without specific
measures or the use of dedicated tools."
(...) Compatibility with heat exchange fluids of non metallic parts
17.1. Test samples shall be submerged in heat exchange medium for 168 hours at
90 °C; then they shall be dried for 48 hours at a temperature of 40 °C.
Language:English
Score: 1184679.6
-
HTTP://DACCESS-ODS.UN.ORG/ACCE....1/ADD.66/REV.1/AMEND.2&LANG=E
Data Source: ods
REGULATION NO. 79 - REVISION 2 - AMENDMENT 2
The towing vehicle is / is not
2
equipped with an electrical connector fulfilling
the relevant requirements of Annex 7
7.2. (...) The power supply provided by the connector referenced in paragraph 2.5.
below shall be used for the powering of the trailer steering system. (...) Until a uniform standard has been defined the connector used to connect to
the trailer shall fulfil the following:
(a) The pins shall have a current carrying capacity compatible with the
maximum continuous current defined in paragraph 2.3. above;
(b) Until uniform standards have been agreed the environmental
protection of the connector shall be appropriate to the application and
included in the Annex 6 assessment; and
(c) The connector shall not be interchangeable with an existing electrical
connector currently used on the towing vehicle i.e.
Language:English
Score: 1181839.3
-
https://daccess-ods.un.org/acc....1/ADD.78/REV.2/AMEND.2&Lang=E
Data Source: ods
